Broadcast Tools ADMS 44.22 Manual de Serviço descarregar pdf (Página 38)

XStudio 338

Property

REQ

Description

category will be faded down at Aux Mark during playback.

Music fade applies to all playback channels (decks).

Fade Rate

If music fade is enabled, this value determines how

quickly the audio is faded. The default value is 1000, the

maximum value is 32000. The higher the value, the

quicker the audio fade.

Connection Properties

IP Address

The IP address of the host audio engine. The default

value is: 127.0.0.1

The default value should be used unless XEngine is

installed on another PC or the rcServer software used to

convert TCP/IP to serial for DCS and Maestro is located

on another PC.

Listen Port

Default: 5391 This TCP/IP port is used for control and

response communications with the audio server engine.

The value must be the same for both XStudio and the

host. If XEngine is used and is located on the same PC,

changes to the port numbers are automatically updated

for XEngine. If this property is changed, you will need to

restart XStudio for the changes to take effect.

File Xfr Port

Default: 6001 This TCP/IP port is reserved for transferring

file data between XStudio and the host audio server and

is not presently used. It is for future expansion.

User Name

Default: XStudio This setting is used only when using

XStudio to control a DCS or Maestro system. It identifies

XStudio to the rcServer application, which may be hosting

several connections.

Enabled IP Event Logging

If checked, XStudio will log TCP/IP-specific events to a

separate log file and would typically be used for

troubleshooting communications problems between

XStudio and a host audio server not located on the same

PC as XStudio. The default value is unchecked

(disabled).

Advanced Properties

Audio Buffers

The number of audio buffers that will be used by the audio

engine. The default is 30. To reduce audio stutter or skip

when audio files are located on a network drive, you can

increase this value to a maximum of 256. Settings ranging

between 30 (the default) and 90 should be adequate for

most operating environments.

Enable PCM Silence Trim

If enabled, any "dead air" at the beginning of a PCM cart

will be skipped when the cart is played. Applies to PCM

carts only, apt-X and MPEG are not supported.

Master Gain

The master gain adjustment for XEngine (the audio

engine). Valid values range from -60 to +6, the default is

zero.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 361 362

Comentários a estes Manuais

Sem comentários

Broadcast Tools ADMS 44.22 Manual de Serviço Página 38

Comentários a estes Manuais