Broadcast Tools DSC-20 Manual de Instalação descarregar pdf (Página 32)

Preliminary 8-2002 RSHD Smartcaster Installation Manual

Setup Screen for the RIDZ Switcher

There are three software setup screens that will affect the operation of the RIDZ

Switcher. They are OPTION SETUP, ADDRESS SETUP, and MISCELLANEOUS

SETUP.

OPTION SETUP number 6 is the default switcher input for recording to

SMARTCASTER. When the operator enters the Record Screen, the system will

automatically switch the record bus on the switcher to that input. Normally, this is the

channel the production board is connected to on the RIDZ. Also, make sure that number

17, Detect Closures by: is set to T

Next is ADDRESS SETUP where the hardware address for the TTL card is set. This

should have already been setup at the factory, so don’t change this without calling the

Support Line for assistance.

Last, there is MISCELLANEOUS SETUP option number 8, number of Smart ( RIDZ )

switchers. Valid options are 0-3. Choose whatever number is correct for this station.

Most of the time this will be one.

Fig. 7.1. The Option Setup Screen. Numbers 6 and 17

are important for the RIDZ Switcher.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 56 57

Sem comentários

Broadcast Tools DSC-20 Manual de Instalação Página 32