Broadcast Tools DSC-20 Manual de Instalação descarregar pdf (Página 26)

Preliminary 8-2002 RSHD Smartcaster Installation Manual

Software Input Mapping in the SMARTCASTER:

For the SMARTCASTER to recognize a closure, it must first be mapped. Please read

this document thoroughly before calling the Support Line. While not a manual for

software operation, there are some features you need for the installation of the

Smartcaster, mapping inputs is one of them.

Fig. 4.1. One of eight Input Mapping screens for network inputs.

Directly related to the Fanout (780) board.

The internal control card for the RIDZ Switcher also has 32 inputs for different closures.

Each of these inputs can be "mapped" to fire spot breaks or Functions. In addition, the

SMARTCASTER can be programmed to accept these inputs at all times, or only when a

specific network is on the air. (Obviously, during the ABC newscast, it is not desirable

for the SMARTCASTER to play SMN's jingle.) There are 16 closure inputs per 780

board. If you need the rest of the inputs, call for the additional 780 board.

In the example, KXYZ station has an 8x2 Audio Switcher hooked up with the networks

shown below:

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 56 57

Sem comentários

Broadcast Tools DSC-20 Manual de Instalação Página 26