Broadcast Tools Telco Sentinel Manual do Utilizador descarregar pdf (Página 14)

e-mail:

voice:

360.854.9559

fax:

866.783.1742

Relay Sentinel Installation and Operation Manual

SETUP

SMTP Port: Normally Port 25 Default: 25

Return Address: Enter your return email here.

NOTE: The user must enter the following items before an email can be successfully sent:

SMTP Server Address, SMTP Port, Return Address, Host ID and Recipient Address 1. The

test email is sent to email recipient address 1. The user should press the “Save Settings”

button after entering the SMTP information before attempting an email test.

SMTP Port: Normally Port 25 Default: 25

Return Address: Enter your return email address here.

NOTE: After entering the return email address, you can test email operation by pressing

the “Send Test Email” button.

Host ID: Enter something here, to identify the host.

Logging Email Address: IP address for the “Logging” email recipient (may be dif-

ferent from the four “Alarm” Recipient Addresses.

Logging Interval (Hours): This determines how often the input status is emailed. If

set to 0 (zero), no email will be sent. Default: 1

“Alarm” Recipient Addresses: Email Recipient 1

Email Recipient 2

Email Recipient 3

Email Recipient 4

Listening Port: Enter the port of the Status Sentinel™. Normally 10001

Listening Enabled: Normally unchecked unless paired with the Status

Sentinel™ to form a “Relay Extension Cord”.

Backup DNS Server IP Add: Enter your DNS address here. Default: 192.168.1.1

NTP Server Address: Enter the NTP address here. Default: pool.ntp.org

NTP Port: Default: 123

NTP Update Interval (Min):Time between timing updates. Default: 30

NTP Enabled: Must be enabled for correct timing. Default: Enabled

Time Zone Offset from UTC: Must be set for correct timing. Default: -8

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sem comentários

Broadcast Tools Telco Sentinel Manual do Utilizador Página 14